dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

Component Tests and General Diagnostics|Page 2010 > < Component Tests and General Diagnostics|Page 2008
Page 163
background image

STEP 11. Check the harness wires between fog light relay connector A-06X and fog light connectors A-27 and A-31 and combination meter
connector C-103.

NOTE:  After checking intermediate connectors C-05 and C-209, check the wires. If intermediate connectors C-05 and C-209 are damaged, repair or
replace them. Refer to Harness Connector Inspection.

Q: Are the harness wires between fog light relay connector A-06X and fog light connectors A-27 and A-31 and combination meter connector
C-103 in good condition?

YES: Go to Step 12.
NO: Repair them. The fog lights should illuminate normally.

STEP 12. Replacement of ECU

1. Replace the front-ECU.
2. The fog lights should illuminate normally.

Q: Do the fog lights illuminate normally?

Component Tests and General Diagnostics|Page 2010 > < Component Tests and General Diagnostics|Page 2008