dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

Component Tests and General Diagnostics|Page 2026 > < Component Tests and General Diagnostics|Page 2024
Page 179
background image

NOTE:  After checking intermediate connector C-209 and junction block connector C-303 and C-309, check the wires. If intermediate connector C-209
and junction block connector C-303 and C-309 are damaged, repair or replace them. Refer to Harness Connector Inspection.

Q: Are the harness wire between theft-alarm horn relay connector A-11X and fusible link (2) in good condition?

YES: There is no action to be taken.
NO: Repair them. The horn should sound when the theft-alarm system is triggered.

STEP 7. Check the theft-alarm horn relay connector A-11X and ETACS-ECU connector C-312 for damage

Q: Are theft-alarm horn relay connector A-11X and ETACS-ECU connector C-312 in good condition?

YES: Go to Step 8.
NO: Repair or replace them. Refer to Harness Connector Inspection. The horn should sound when the theft-alarm system is triggered.

Component Tests and General Diagnostics|Page 2026 > < Component Tests and General Diagnostics|Page 2024