dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

Component Tests and General Diagnostics|Page 2027 > < Component Tests and General Diagnostics|Page 2025
Page 180
background image

STEP 8. Check the harness wires between theft-alarm horn relay connector A-11X and ETACS-ECU connector C-312.

NOTE:  After checking intermediate connector C-209, check the wires. If intermediate connector C-209 is damaged, repair or replace it. Refer to
Harness Connector Inspection.

Q: Are the harness wires between theft-alarm horn relay connector A-11X and ETACS-ECU connector C-312 in good condition?

YES: Go to Step 9.
NO: Repair them. The horn should sound when the theft-alarm system is triggered.

STEP 9. Check the theft-alarm horn relay connector A-11X and theft-alarm horn connector A-25 for damage.

Q: Are theft-alarm horn relay connector A-11X and theft-alarm horn connector A-25 in good condition? 

YES: Go to Step 10.
NO: Repair or replace them. Refer to Harness Connector Inspection. The horn should sound when the theft-alarm system is triggered.

Component Tests and General Diagnostics|Page 2027 > < Component Tests and General Diagnostics|Page 2025