Stratus Coupe V6-3.0L VIN H (2001)
STEP 1. Check the hazard warning light switch.
Q: Is the hazard warning light switch in good condition?
YES: Go to Step 2.
NO: Repair it. The hazard warning light switch input signal should be able to be checked and the functions, which are described in the "Technical
Description (comment)," should work normally.
STEP 2. Check the hazard warning light switch ground circuit at the hazard warning light switch connector C-09.
1. Disconnect the hazard warning light switch connector C-09 and measure at the harness side.
2. Measure the resistance between terminal 2 and ground.
Q: Is the resistance less than 2 ohm?
YES: Go to Step 5.
NO: Go to Step 3.
STEP 3. Check hazard warning light switch connector C-09 for damage.
Q: Is hazard warning light switch connector C-09 in good condition?
