Stratus Coupe V6-3.0L VIN H (2001)
functions, which are described in the "Technical Description (comment)," should work normally.
STEP 7. Check the harness wires between passenger's door switch connector D-21 and ETACS-ECU connectors C-311 and C-313.
NOTE: After checking intermediate connector C-210 and junction block connector C-314, check the wires. If intermediate connector C-210 and
junction block connector C-314 are damaged, repair or replace them. Refer to Harness Connector Inspection.
Q: Are the harness wires between passenger's door switch connector D-21 and ETACS-ECU connector C-311 and C-313 in good condition?
YES: Replace the ETACS-ECU. The passenger's door switch input signal should be able to be checked and the functions, which are described in the
"Technical Description (comment)," should work normally.
NO: Repair them. The passenger's door switch input signal should be able to be checked and the functions, which are described in the "Technical
Description (comment)," should work normally.
Inspection Procedure O-9
The driver's or passenger's door lock key cylinder switch is not sent to the ETACS-ECU.