Stratus Coupe V6-3.0L VIN H (2001)
STEP 5. Check the harness wires between driver's door lock actuator switch connector E-13 and ground.
NOTE: After checking intermediate connector C-211, check the wires. If intermediate connector C-211 is damaged, repair or replace it. Refer to
Harness Connector Inspection.
Q: Are the harness wires between driver's door lock actuator switch connector E-13 and ground in good condition?
YES: There is no action to be taken.
NO: Repair them. The input signal from the driver's door lock actuator switch should be able to be checked and the functions, which are described in
the "Technical Description (comment)," should work normally.
STEP 6. Check the driver's door lock actuator switch connector E-13 and ETACS-ECU connector C-312 for damage.
YES: Go to Step 7.
NO: Repair or replace them. Refer to Harness Connector Inspection. The input signal from the driver's door lock actuator switch should be able to be
checked and the functions, which are described in the "Technical Description (comment)," should work normally.
