Stratus Coupe V6-3.0L VIN H (2001)
STEP 5. Check the harness wires between power window main switch connector E-12 and ground.
NOTE: After checking intermediate connector C-211, check the wires. If intermediate connector C-211 is damaged, repair or replace it. Refer to
Harness Connector Inspection.
Q: Are the harness wires between power window main switch connector E-12 and ground in good condition?
YES: There is no action to be taken.
NO: Repair them. The door lock switch input signal should be able to be checked and the central door locking system should work normally.
STEP 6. Check the power window main switch connector E-12 and ETACS-ECU connector C-312 for damage.
Q: Are power window main switch connector E-12 and ETACS-ECU connector C-312 in good condition?
YES: Go to Step 7.
NO: Repair or replace them. Refer to Harness Connector Inspection. The door lock switch input signal should be able to be checked and the central
door locking system should work normally.
