dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

Component Tests and General Diagnostics|Page 2088 > < Component Tests and General Diagnostics|Page 2086
Page 241
background image

STEP 1. Check the trunk lid lock key cylinder switch.

Q: Is the trunk lid lock key cylinder switch in good condition?

YES: Go to Step 2.
NO: Replace it. The input signal from the trunk lid lock key cylinder switch should be able to be checked and the theft-alarm system should be armed
normally.

STEP 2. Check the trunk lid lock key cylinder switch ground circuit at trunk lid lock key cylinder switch connector F-06.

1. Disconnect trunk lid lock key cylinder switch connector F-06 and measure at the harness side.

2. Measure the resistance between terminal 2 and ground.

Q: Is the resistance less than 2 ohm?

YES: Go to Step 5.
NO: Go to Step 3.

STEP 3. Check trunk lid lock key cylinder switch connector P-06 for damage.

Q: Is trunk lid lock key cylinder switch connector F-06 in good condition?

Component Tests and General Diagnostics|Page 2088 > < Component Tests and General Diagnostics|Page 2086