Stratus Coupe V6-3.0L VIN H (2001)
Connectors
CIRCUIT OPERATION
The ETACS-ECU operates various functions according to the input signal from the speed sensor.
TECHNICAL DESCRIPTION (COMMENT)
The speed sensor input signal is used to operate the following device or system:
-
Door ajar tone alarm function
-
Rolling lock function
-
Windshield intermittent wiper
If the signal fails these device or system will not work normally.
TROUBLESHOOTING HINTS
-
Malfunction of the speed sensor
-
Malfunction of the ETACS-ECU
-
Damaged harness wires or connectors
DIAGNOSIS
Required Special Tools:
-
MB991223: Test Harness Set
-
MB991502: Scan Tool (MUT-II)
-
MB991529: Diagnostic Trouble Code Check Harness
STEP 1. Check the speedometer operation.
Q: Does the speedometer work normally?
