Stratus Coupe V6-3.0L VIN H (2001)
TROUBLESHOOTING HINTS
Malfunction of the column switch (turn-signal light and lighting switch)
-
Malfunction of the ETACS-ECU
-
Damaged harness wires or connectors
DIAGNOSIS
Required Special Tools:
-
MB991223: Test Harness Set
-
MB991502: Scan Tool (MUT-II)
-
MB991529: Diagnostic Trouble Code Check Harness
STEP 1. Check the ignition switch positions.
Q: Does a diagnostic trouble code set when the ignition switch is at any of the positions?
YES: Carry out the troubleshooting by referring to the Diagnostic Trouble Code Chart.
NO: Go to Step 2.
STEP 2. Check the turn-signal light and lighting switch.
Q: Is the turn-signal light and lighting switch in good condition?
YES: Go to Step 3.
NO: Replace it. The input signal from the column switch (turn-signal light and lighting switch) should be able to be checked and the functions, which
are described in the "Technical Description (comment)," should work normally.
STEP 3. Replacement of ECU
1. Replace the column switch.
2. The input signal from the column switch (turn-signal light and lighting switch) should be able to be checked and the functions, which are described
in the "Technical Description (comment)," should work normally.
Q: Is the input signal from the column switch (turn-signal light and lighting switch) input normally?
YES: There is no action to be taken.
