Stratus Sedan V6-2.7L VIN T FFV (2003)
Clutch Coil Lead Wire Harness
12. Remove screw and retainer from clutch coil wire harness on the front of the compressor.
Clutch Field Coil Snap Ring
13. Remove snap ring from compressor hub and remove clutch field coil. Slide clutch field coil off of the compressor hub.
INSTALLATION
1. Install clutch field coil and snap ring.
2. Install clutch coil wire harness retaining clip on the front of the compressor and tighten the screw.
3. Align rotor assembly squarely on the front compressor housing hub.
