Viper V10-8.3L VIN Z (2004)
Seats: Service and Repair
Seat
SEAT
REMOVAL
1. Open deck lid.
2. Remove four bolts to battery compartment cover and remove cover.
3. Disconnect and isolate the battery negative cable.
Fig. 1
4. Move seat as needed to access seat attaching front bolts and rear nuts (Fig. 1).
Fig. 2
5. Disconnect electrical connector (Fig. 2).
6. Remove seat from vehicle.
INSTALLATION
1. Place seat assembly in vehicle.
2. Connect electrical connector (Fig. 2).