Viper V10-8.3L VIN Z (2004)
3. Start front seat attaching bolts (Fig. 1).
NOTE: The front BOLTS must be torqued to the specified torque prior to the rear NUTS being secured.
4. Tighten front seat front bolts to 40 N.m (30 ft.lbs.) torque.
5. Tighten front seat rear nuts to 40 N.m (30 ft.lbs.) torque.
6. Connect the battery negative cable.
7. Place battery access cover into place and install four bolts.
8. Close deck lid.
9. Verify vehicle and system operation.
Seat Adjusters
SEAT ADJUSTERS
REMOVAL
NOTE: Do not service adjusters separate from cushion assembly.
1. Remove the seat.
Fig. 3
2. Remove the screw and remove the recliner handle. (Fig. 3)