Viper V10-8.3L VIN Z (2004)
Fig. 11
4. Unzip and position aside the seat back cover. (Fig. 11)
5. Remove the recliner bolts and remove the recliner.
INSTALLATION
1. Install the recliner and install the bolts.
2. Tighten the bolts so 28 N.m (21 ft.lbs.).
3. Position the seat back cover and zip closed.
4. Connect the recliner cable.
5. Position the seat cushion cover back and install the recliner handle and screw, if equipped.
6. Install the seat.
Seat Cushion Assembly
SEAT CUSHION ASSEMBLY
REMOVAL
1. Remove the seat.