Viper GTS V10-488 8.0L (1998)
18. Install throttle cable on accelerator pedal using the following procedure. From inside the vehicle, hold the throttle pedal up and install throttle
cable through rubber grommet in throttle pedal. Install cable retainer on throttle cable with small end facing accelerator pedal. The install cable
retainer into rubber grommet on upper end of accelerator pedal shaft.
19. Open the throttle bodies to the wide open position.
20. Slide the slug on the end of the throttle cable into the throttle cam.
21. Adjust the throttle cable. After installation of the adjustable pedal assembly the throttle cable must be adjusted.
NOTE: When installing the knee blocker panel correctly position the fuse box behind the knee blocker panel.