Viper RT-10 V10-8.0L VIN E (1997)
Driver/Vehicle Information Display: Service and Repair
REMOVAL
Center Bezel
1. Remove instrument panel center bezel. Disconnect the cigar lighter, power window switch and rear window defogger switch (if equipped) wire
connectors.
Instrument Panel
2. Remove knee blocker right and left sides.
3. Remove headlamp switch knob. Using a stiff wire or a small tool, insert it into the hole at the bottom of the knob. Pushing up with the tool and
gently pull rearward till the lock tab releases the knob. Remove knob. Use care not to break the locking tab.
4. Remove the steering column shroud and it may require lowering of the steering column for additional clearance.
5. Remove instrument panel bezel. Use care not to break the locking tab.
6. Remove three mounting screws from message center.
7. Remove message center and disconnect wire connectors.
8. Check for lamps not lighting.