Viper RT-10 V10-8.0L VIN E (1997)
Backup Light Bulb: Service and Repair
REMOVAL
1. Remove trunk lining as necessary to gain access to the trunk pan behind the turn and back-up lamp.
2. Remove plugs covering the access holes in the trunk pan for the turn and back-up lamp.
Turn Signal And Back Up Lamp
3. Remove plastic seal nuts holding the turn and back-up lamp to the tail lamp closure panel through the access holes.
CAUTION: Do not drop the plastic seal nuts between the tail lamp closure panel and the trunk pan or the tail lamp closure panel will need to be
removed.
4. Separate the turn and back-up lamp from the tail lamp closure panel.
Turn Signal And Back Up Lamp
5. Rotate socket counterclockwise one half turn and pull socket from lamp.
6. Rotate and pull bulb from socket.
INSTALLATION
1. Push and twist bulb into socket.
2. Push socket into lamp and rotate socket clockwise one half turn.
3. Position the turn signal and back-up lamp in the tail lamp closure panel.
4. Install the plastic seal nuts to hold the turn and back-up lamp to the tail lamp closure panel through the access holes.
5. Install plugs to cover the access holes in the trunk pan for the turn and back-up lamp.
6. Install the trunk lining.
