Eagle Sedan L6-258 4.2L (1984)
Steering Column: Service and Repair
With Tilt
Removal
Fig. 1 Typical steering column shift linkage installation
1. Disconnect battery ground cable, then place alignment marks on intermediate shaft and gear for use during installation.
2. Remove flexible coupling nuts and disengage intermediate shaft from coupling.
3. On models equipped with column shift, disconnect shift rod from lower steering column shift lever.
4. Move seat as far rearward as possible, then remove lower finish panel or tube cover.
5. Remove package tray, if equipped.
6. Lift lock tab on steering column wiring harness wire connector and separate column harness connector from instrument panel connector.
7. Press lock tab on ignition switch wiring harness connector and disconnect harness from switch. On 1982 - 87 models, disconnect dimmer switch
harness.
8. Disconnect cruise command wire connector, if equipped.