Summit Wagon AWD L4-2350cc 2.4L SOHC (1995)
Ignition Coil And Power Transistor Harness Inspection
HARNESS INSPECTION
WAVE PATTERN INSPECTION USING AN ANALYZER
Ignition Coil And Power Transistor
-
Ignition coil primary signal
-
Ignition power transistor control signal
Measurement method
1. Disconnect the ignition power transistor connector, and connect the special tool (test harness: MB991348) in between. (All terminals should be
connected.)
2. Connect the analyzer special patterns pickup to ignition power transistor unit connector terminal No 6.
Alternate method (test harness not available)
1. Connect analyzer special patterns pickup to ECM terminal 10 for ignition power transistor.
Ignition Coil And Power Transistor