Talon FWD L4-1997cc 2.0L DOHC Turbo VIN F SMFI (1998)
2. Install the vacuum hose to the brake booster nipple as shown above. Secure the hose with the hose clip.
CAUTION:
a. The check valve and the pipe part of the brake booster must not contact each other.
b. Connect so that the marking faces upwards.
3. Install the other end of the vacuum hose fully onto its port on the engine. Secure the hose using the hose clip.
4. Check clearance adjustment between brake booster push rod and primary piston.
a. Adjust the clearance (A) between the brake booster push, rod and primary piston as follows:
