Talon FWD L4-1997cc 2.0L DOHC Turbo VIN F SMFI (1998)
>D< Sub Gear / Cone Spring / Snap Ring Installation
>E< Rear Taper Roller Bearing Installation
>F< Snap Ring Installation
Select the thickest snap ring that can be fitted in the snap ring groove.
Standard value:
Input shaft rear bearing end play 0-0.09 mm (0-0.0035 inch)
CAUTION:
1. Do not reuse the snap ring.
2. Do not open the snap ring too wide by pliers, or the sleeve will be improperly installed.
>G< Bearing Sleeve For 5th Speed Gear Installation