Vision V6-3.5L VIN F (1997)
Fig. 10 Dust Boot Removal
7.
Remove the piston dust boot from the caliper and discard.
Removing Piston Seal From Caliper
8.
Using a soft tool, such as a plastic trim stick, work piston seal out of its groove in caliper piston bore. Discard old seal. Do not use a screw
driver or other metal tool for this operation, because of the possibility of scratching piston bore or burring edges of seal groove.
9.
Clean all parts using alcohol or a suitable solvent and wipe dry using only a lint free cloth. No lint residue can remain in caliper bore. Clean out
all drilled passages and bores. Whenever a caliper has been disassembled, a new boot and seal must be installed at assembly.