Vision V6-3.5L VIN F (1997)
Brake Master Cylinder: Service and Repair
Master Cylinder Reservoir Replacement
DISASSEMBLE
1.
Using an appropriate cleaner such as Mopar, Brake Parts Cleaner, clean the master cylinder housing and brake fluid reservoir.
2.
Remove the brake fluid reservoir caps. Using a syringe or equivalent empty brake fluid from reservoir.
3.
Remove the master cylinder from the vacuum booster.
4.
Clamp the master cylinder in vise.
Reservoir Retaining Pins
5.
Remove the 2 fluid reservoir to master cylinder retaining pins.
NOTE: Do not pry off fluid reservoir using a tool, damage to reservoir may result.
Removing Reservoir
6.
Remove reservoir from master cylinder by pulling upward on the reservoir while rock it from side to side.
Reservoir Sealing Grommets
7.
Remove the master cylinder housing-to-reservoir grommets.
ASSEMBLE
