Vision V6-3.5L VIN F (1997)
Wheel Cylinder: Service and Repair
Wheel Cylinder Removal and Installation
Dust Cap Removal
Rear Hub And Bearing Retaining Nut Removal
Brake Hose Bracket And Tube
REMOVE
1.
Raise vehicle on jackstands or a frame contact type hoist.
2.
Remove rear tire and wheel assembly from the vehicle.
3.
Remove rear hub and bearing assembly dust cap.
4.
Remove rear hub and bearing assembly cotter pin, nut retainer, wave washer, hub/bearing retaining nut and the washer from rear spindle. Then
remove rear hub and bearing assembly from spindle.
5.
Remove the rear brake shoes from the brake support plate. Refer to Drum Brake System Brake Shoe Service and Repair Removal for the proper
