ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

ABOUT US
Passenger Side Temperature Blend Door Actuator > < Driver Side Temperature Blend Door Actuator

C-MAX 2003.75 (06.2003-)

Control Components - Air Inlet Blend Door Actuator C-MAX 2003.75 (06/2003-)
Removal and Installation

  1. Remove the center console extension. For additional information, refer to: (501-12 Instrument Panel and Console)
    Floor Console Extension (Removal and Installation),
    Floor Console Extension - Vehicles Built From: 03/2007, Vehicles With: Center Armrest (Removal and Installation).

2. Remove the components in the order indicated in the following illustration(s) and table(s).

 
Item
Part Number
Description
1
-
Footwell trim panel screws
2
-
Footwell trim panel
3
-
Glove compartment side trim
4
-
Glove compartment screws
5
-
Glove compartment light switch connector
6
-
Glove compartment light connector
7
-
Glove compartment
See Removal Detail

 
Item
Part Number
Description
8
-
Air distribution flap actuator connector
9
-
Air distribution flap actuator bolts
10
-
Air distribution flap actuator

3. To install, reverse the removal procedure.

Removal Details

Item 7 : Glove compartment
  1. Disconnect passenger airbag (PAD) deactivation switch connector (if fitted).

Passenger Side Temperature Blend Door Actuator > < Driver Side Temperature Blend Door Actuator