ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

ABOUT US
Safety Belt Buckle and Pretensioner > < Rear Center Safety Belt Retractor

C-MAX 2003.75 (06.2003-)

Safety Belt System - Safety Belt Shoulder Height Adjuster C-MAX 2003.75 (06/2003-)
Removal and Installation

Removal
  1. Using a thin bladed screwdriver, remove the B-pillar upper trim panel retaining screws cover.

  1. Remove the B-pillar upper trim panel retaining screws.
  1. Locally detach the front and rear door weatherstrips.

  1. Detach the B-pillar upper trim panel from the B-pillar.

  1. CAUTION:
    CAUTION:The bolt securing the safety belt anchor is held captive by a metal washer. The bolt, spacer and metal washer must remain on the safety belt anchor at all times when the safety belt is detached or removed.
    Detach the safety belt upper anchor from the safety belt shoulder height adjuster.

  1. Remove the safety belt shoulder height adjuster retaining bolt.

  1. Remove the safety belt shoulder height adjuster.
    • Lift the adjuster to detach the locating tangs.

Installation

  1. CAUTION:
    CAUTION:Make sure the safety belt shoulder height adjuster locating tangs are correctly located.
    NOTE:
    NOTE:Make sure the safety belt shoulder height adjuster locking control is correctly located on the safety belt shoulder height adjuster.
    To install, reverse the removal procedure.

Safety Belt Buckle and Pretensioner > < Rear Center Safety Belt Retractor