Contour V6-153 2.5L DOHC VIN L SFI (1997)
Temperature Sensor (Gauge): Service and Repair
REPLACEMENT
1. Drain engine cooling system.
2. Disconnect battery ground cable (14301).
3. Remove air cleaner outlet tube (9B659). See Powertrain Management.
4. Disconnect fuel charging wiring (9D930) from water temperature indicator sender unit (10884) located on the water crossover.
5. Remove water temperature indicator sender unit.
6. To install, reverse removal procedure noting the following:
^
Tighten water temperature indicator sender unit to 18-24 Nm (13-18 ft. lbs.).
