ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

ABOUT US
C-Pillar Trim Panel > < A-Pillar Trim Panel

Cougar 1999 (08.1998-01.2001)

Interior Trim and Ornamentation - B-Pillar Trim Panel Cougar 1999 (08/1998-01/2001)
Removal and Installation

Removal

  1. Remove the A-Pillar trim panel.
    For additional information, refer to A-Pillar Trim Panel in this section.
  1. Remove the rear quarter trim panel.
    For additional information, refer to Rear Quarter Trim Panel in this section.

  1. Detach the front safety belt top anchor.
    1. Open the cover.
    1. Detach the front safety belt top anchor.

  1. Remove the coat hook.
    1. Depress the hook.
    1. Remove the screw.
    1. Remove the coat hook.

  1. Disconnect the interior scan sensor electrical connector (if equipped).

  1. Remove the B-pillar trim panel clip.

  1. Remove the B-pillar trim panel.

  1. NOTE:
    NOTE:Carefully pass the wiring harness through the trim panel.
    Remove the interior scan sensor (if equipped).

Installation
  1. To install, reverse the removal procedure.

C-Pillar Trim Panel > < A-Pillar Trim Panel