Crown Victoria V8-4.6L Flex Fuel (2008)
13. Loosen the PCM wiring connector bolt and disconnect the connector.
14. Loosen the bulkhead wiring connector retaining bolt and disconnect the connector.
^
Position the bulkhead wiring connector aside for access.
^
Push the instrument panel side of the bulkhead wiring connector into the passenger compartment.
15. Remove the steering column brace-to-parking brake control bolt.
^
To install, tighten to 12 Nm (9 ft. lbs.)
16. Remove the instrument panel cowl side bolt.
^
To install, tighten to 50 Nm (37 ft. lbs.)
17. Remove the instrument panel cowl side nut.
^
To install, tighten to 55 Nm (41 ft. lbs.)
18. Pull the instrument panel slightly rearward and retain it using a small block of wood.