Crown Victoria V8-4.6L Flex Fuel (2008)
8. Start the engine and recenter the steering wheel.
^
Recheck the toe settings and adjust if necessary.
9. Tighten the tie-rod jam nuts and install the clamps.
^
Tighten to 55 Nm (41 lb-ft).
10. WARNING: If the vehicle is equipped with a fire suppression system, repower the system. For important safety warnings and
procedures, refer to Fire Suppression System. Failure to follow these instructions may result in serious personal injury.
If equipped with fire suppression system, repower the system.
11. If equipped, turn the air suspension service switch to the ON position.
