Crown Victoria V8-4.6L SOHC VIN W (2005)
5. CAUTION: The bolts must be tightened in the sequence shown, or damage to the crossmember bracket may occur.
Install the LH and RH crossmember bracket nuts and bolts.
1. Tighten the rear bolt.
2. Tighten the front bolt.
3. Tighten the nuts.
6. Install the LH and RH control arm rear mounting bolts.
7. Position the brake line into the retaining clips at the rear of the crossmember.
8. Install the LH and RH ABS harness.
1. Install the two harness retainers into the frame.
2. Install the two brackets and bolts.
3. Install the two ABS harness into the support brackets.