Crown Victoria V8-4.6L SOHC VIN W (2005)
Wheel Speed Sensor: Service and Repair
Wheel Speed Sensor Rear
Wheel Speed Sensor Rear
Removal and Installation
1. Remove the rear seat cushion.
2. Disconnect the rear wheel speed sensor electrical connector.
3. Push the sensor harness grommet through the passenger compartment floor.
4. WARNING: The electrical power to the air suspension system must be turned off prior to hoisting, jacking, or towing an air suspension
vehicle. Failure to do so can result in unexpected inflation or deflation of the air springs, which can result in shifting of the vehicle during
these operations. Failure to follow these instructions may result in personal injury.
With the vehicle in NEUTRAL, position it on a hoist.
5. Disconnect the routing clips.