Crown Victoria V8-4.6L SOHC VIN W (2005)
Remove the differential pinion shaft.
1
Remove the differential pinion shaft lock bolt.
2
Remove the differential pinion shaft.
6. CAUTION: Do not damage the rubber O-ring in the U-washer groove.
Remove the U-washer.
1
Push the axle shaft inboard.
2
Remove the U-washer.
7. Reinstall the differential pinion shaft.
1
Push the axle shaft outboard.
2
Install the differential pinion shaft.
3
Install the differential pinion shaft lock bolt finger-tight.
8. CAUTION: Do not damage the wheel bearing oil seal.