Crown Victoria V8-4.6L SOHC VIN W (2005)
Install the axle shaft.
4. CAUTION: Do not damage the rubber O-ring in the U-washer groove.
Install the U-washer.
1
Position the U-washer on the button end of the axle shaft.
2
Pull the axle shaft outward to seat the U-washer in the side gear.
5. Install the differential pinion shaft.
1
Align the hole in the differential pinion shaft with the lock bolt hole.
2
Install the differential pinion shaft lock bolt.
6. Install the differential housing cover.
7. Install the rear brake anti-lock sensor.
8. Install the brake disc.