Crown Victoria V8-4.6L VIN W (2000)
9. Remove the stabilizer bar link (5K484) from the front wheel spindle.
Remove the nut.
Remove the link.
10. NOTE: The lower control arm ball joint nut is coated with a dry adhesive and a new nut must be installed whenever the nut is loosened or
removed.
Remove the lower ball joint nut. Discard the nut.
11. Remove the front wheel spindle.
Remove the pinch bolt and nut.
Raise the front suspension upper arm (3083).
Remove the front wheel spindle.
12. Remove the discard the ball joint dust boot.
13. Using the special tools, press the ball joint from the suspension lower arm (3078).
