Crown Victoria V8-4.6L VIN W (2000)
Suspension Control Module: Service and Repair
Removal
WARNING: Before performing maintenance on any air suspension components, disconnect the power to the system by turning off the air
suspension switch located on the LH side of the luggage compartment to prevent vehicle damage or personal injury.
CAUTION: Electronic modules are sensitive to static electrical charts. If exposed to these charges, damage may result.
1. Turn the air suspension switch off.
2. Disconnect the battery ground cable.
3. Pull out the lower instrument panel insulator.
1
Remove the pushpins.
2
Pull out the lower instrument panel insulator.
4. Remove the lower instrument panel insulator.
1
Disconnect the power point.
2
Disconnect the courtesy lamp.
3
Remove the lower instrument panel insulator.
5. Remove the rear air suspension control module.
1
Remove the screws.
2
Disconnect the electrical connectors.
3
Remove the rear air suspension control module.
Installation
