E 150 V8-4.6L SOHC VIN W (2004)
7. CAUTION: Do not damage the wheel bearing oil seal.
Remove the two axle shafts.
Installation
1. Lubricate the lip of the wheel bearing oil seal with grease.
2. CAUTION: Do not damage the wheel bearing oil seal.
Install the two axle shafts.
3. CAUTION: Do not damage the rubber O-rings in the U-washer grooves.
Install the U-washers.
1. Position the two U-washer on the button ends of the axle shafts.
2. Pull the axle shafts outward.
