E 250 V10-6.8L VIN S (2005)
11. Disconnect the crankshaft position (CKP) sensor and the A/C compressor electrical connector. Remove the tie-strap.
12. NOTE: The red clip must be pulled out before disconnecting the electrical connector.
Disconnect the electronic throttle body (TB) electrical connector.
13. NOTE: The red clip must be pulled out before disconnecting the electrical connector.
Disconnect the throttle position (TP) sensor electrical connector.
14. Disconnect the transmission wiring harness and the LH and RH heated oxygen (HO2S) electrical connector.
