E 250 V10-6.8L VIN S (2005)
5. Remove the height adjuster cover.
6. Remove the shoulder safety belt height adjuster.
1
Use the Safety Belt Bolt Torx Bit to remove the bolts.
2
Remove the shoulder safety belt height adjuster.
Installation
1. NOTE:
-
Make sure the safety belt webbing is not twisted prior to installation.
-
Make sure to tighten bolts to specification.
-
Inspect the shoulder safety belt guide cover for damage. If the shoulder safety belt guide cover is damaged or if it does not remain closed,
install a new shoulder safety belt guide.
Follow the removal procedure in reverse order.
