E 250 V8-4.6L (2007)
6. Remove the throttle body (TB). For additional information, refer to Fuel Delivery and Air Induction.
7. Remove the 8 ignition coils. For additional information, refer to Ignition System.
8. Disconnect the upper radiator hose.
9. Disconnect the heater coolant hose.
10. Rotate the tensioner clockwise and remove the accessory drive belt from the generator pulley.
11. Disconnect the generator wiring harness retainer.
12. Remove the 3 bolts and the generator support bracket.
13. Remove the transmission fluid level indicator and tube bolt.
^
To install, tighten to 28 Nm (21 ft. lbs).
14. Remove the nut and position the transmission fluid level indicator and tube aside.
^
To install, tighten to 10 Nm (89 inch lbs).
