E 350 V10-6.8L (2007)
6. Position the fuel charging wiring harness on to the engine.
7. NOTE: The red clip must be pushed in after connecting the electrical connector.
Connect the electronic TB electrical connector.
8. Position the RH fuel charging wiring harness and install the stud bolts.
^
Tighten to 10 Nm (89 inch lbs).
9. Position back the transmission fluid indicator and tube and install the nut.
^
Tighten to 28 Nm (21 ft. lbs).
10. Install the transmission fluid indicator and tube support bracket nut.
^
Tighten to 10 Nm (89 inch lbs).
