E 350 V10-6.8L (2007)
Throttle Body: Service and Repair
Throttle Body - Spacer
THROTTLE BODY - SPACER
Removal
WARNING: Do not smoke or carry lighted tobacco or open flame of any type when working on or near any fuel-related components. Highly
flammable mixtures are always present and can be ignited. Failure to follow these instructions may result in personal injury.
1. Remove the throttle body (TB).
2. Disconnect the positive crankcase ventilation (PCV) tube from the TB spacer heater element.
3. Disconnect the main vacuum line from the TB spacer.
4. Remove the 2 PCV heater element screws.