E 350 1 Ton Van V10-6.8L VIN S (1997)
Parking Brake Cable: Adjustments
Drum Style
Adjusting Clevis Installation
1. Loosen the tension limiter nut to the end of the tension limiter threads.
2. Depress the parking brake pedal to the last detent position.
NOTE: The last detent is 17 clicks.
3. Measure and record the exposed length of the cinch strap.
4. Tighten the tension limiter nut to 7.6-8.3 cm (3-3.25 inches) from the end of the tension limiter threads. Measure from the end of the tension
limiter threads to the beginning of the hex portion of the tension limiter nut.
NOTE: Prevent the tension limiter from turning while tightening.
