E 350 1 Ton Van V10-6.8L VIN S (1997)
4. Install the (A) forward clutch piston with the (B) Lip Seal Protector.
5. Install the (A) steel forward clutch piston apply ring into the (B) forward clutch piston groove.
6. Install the forward clutch piston return spring, with the (A) spring fingers against the (B) forward clutch piston apply ring. Make sure the (C) notch
is positioned so that both ends of the (D) forward clutch piston apply ring are visible.
CAUTION: To ensure durability, the notch between the spring fingers must be positioned so that both ends of the forward clutch piston apply
ring are visible.
7. Install the forward clutch piston return spring retaining ring. Make sure it is properly seated in the groove.
