E 350 Van V8-7.3L DSL Turbo VIN F (1995)
Fluid Pump: Service and Repair
With C6
DISASSEMBLE
CAUTION: All parts must be handled carefully to avoid nicking or burring the bearing or mating surfaces. Lubricate all internal parts with clean
automatic transmission fluid before assembling them. Do not use any other lubricants except on gaskets and thrust washers. These may be coated with
petroleum jelly to facilitate assembly. Always use new gaskets and seals when assembling transmission.
Removing Front Pump Seal
Installing Front Pump Seal
NOTE: The front seal can be replaced after the pump has been installed on the transmission, as shown in the Front Pump Seal Replacement and the
Front Pump Seal Installation images.
