E 350 Van V8-7.3L DSL Turbo VIN F (1995)
Fluid Pump: Service and Repair
With E4OD
DISASSEMBLE
Exploded View Of Front Pump
NOTE: Refer to the Exploded View Of Front Pump image when performing the following procedure.
1. Remove torque converter clutch seal from front of stator support.
2. Remove Teflon coast clutch seals from stator support, then the converter clutch seal from front of stator support.
3. Remove pump outer diameter square cut seal.
4. Remove eleven retaining bolts and separate pump control body and pump body.