E 450 V10-6.8L (2008)
LH engine support insulator
14. Disconnect the engine oil pressure (EOP) switch electrical connector.
15. Remove the EOP switch.
Both engine support insulators
16. Remove the 4 bolts and the engine support insulator being serviced.
Installation
Both engine support insulators
1. Position the engine support insulator and install the 4 bolts.
^
Tighten to 80 Nm (59 lb-ft).
LH engine support insulator
2. Install the EOP switch.
^
Tighten to 18 Nm (13 lb-ft).