E 450 V8-6.0L DSL Turbo VIN P (2004)
1. Using petroleum jelly to hold the bearing or bushing in place, install the output shaft bearing for slip yoke models and the bushing for fixed yoke
models.
2. CAUTION: Be careful not to damage the seals when installing the output shaft.
If the output shaft was removed, install the output shaft and park gear assembly.
3. Install the park pawl shaft.
1. Install the park pawl shaft.
2. Install the park pawl.
3. Install the park pawl return spring.
4. Install the parking rod guide plate.
1. Install the parking rod guide plate.
2. Install the bolts.