Econoline E150 1/2 Ton V8-4.6L SOHC VIN W (2001)
6. Install the brake master cylinder fluid control valve.
7. NOTE: Whenever installing a new brake master cylinder reservoir, install new grommets.
Install the brake master cylinder reservoir.
1
Lubricate the two grommets with High Performance DOT 3 Motor Vehicle Brake Fluid C6AZ-19542-AB or equivalent DOT 3 fluid meeting
Ford specification ESA-M6C25-A, and insert the grommets in the brake master cylinder.
2
Connect the brake master cylinder fluid level warning switch.
3
Press the brake master cylinder reservoir into the grommets until it snaps.
^
If necessary, install the roll pins.
4
Fill the brake master cylinder reservoir with High Performance DOT 3 Motor Vehicle Brake Fluid C6AZ-19542-AB or equivalent DOT 3
fluid meeting Ford specification ESA-M6C25-A.
8. Install the brake master cylinder.
9. Fill the brake master cylinder reservoir with High-Performance DOT 3 Motor Vehicle Brake Fluid C6AZ-19542-AB or equivalent DOT 3 fluid
meeting Ford specification ESA-M6C25-A and install the brake master cylinder filler cap.
10. Bleed the brake master cylinder.