Econoline E150 1/2 Ton V8-4.6L SOHC VIN W (2001)
9. Connect the connector.
10. NOTE: If the vehicle was not equipped with a fluid filter, install a fluid filter service kit (XC3Z-7BI55-AA) follow the instructions supplied in
the kit. If the vehicle was equipped with a fluid filter install a new filter (XC3Z-7Bl55-AB).
Install a new inline transmission fluid filter kit or filter.
11. Remove the supports and lower the vehicle.
12. Connect the battery ground cable.
13. CAUTION: The use of any other fluids can result in the transmission failing to operate in a normal manner or failure.
Refill the transmission.
-
Add 6.2 liters (6.5 quarts) of clean automatic transmission fluid to the transmission through the fluid filler tube.
14. Start the engine. Move the transmission range selector lever through all the gear ranges, checking for engagements.
15. Check and adjust the transmission fluid. If fluid is needed, add fluid in increments of 0.24 liter (0.5 pint) until the correct level is achieved
(cross-hatched area of the fluid level indicator) at normal operating temperature.
